Skip to content

SLIDING, STACKING & PIVOT DOORS

Door automation.
Effortless everyday movement.

Bring convenient operation to large sliding, stacking and pivot doors with Airla door automation. We coordinate the motor and controls with your chosen door manufacturer, so the movement is considered as carefully as the opening.

See relevant products →

Architectural sliding glass door at Wildfire in Newport, Queensland

DESIGNED AROUND THE OPENING

Make more of
your opening.

A large glazed door connects the inside and outside beautifully. Automation helps make that connection part of everyday life, giving you a convenient way to open and close a suitable system.

We start with the door configuration, total moving panel weight and available motor space. From there, Airla assesses the motor, controls and installation details with your manufacturer and project team.

01 /

Sliding and stacking doors

Operate a single slider or coordinate a larger multi-panel opening. The motor selection considers the panels that move, how the system stacks, track performance and the space available for integration.

02 /

Pivot doors

Plan powered operation around a statement entrance or a suitable internal pivot. We assess the door geometry, operating requirements, motor position and the coordination of controls and locking.

03 /

Controls that fit the routine

Choose a touchscreen, supported voice interface or compatible access control. The most useful combination depends on who uses the door, where they approach it and how the opening should operate.

Airla supplies, installs and commissions automation. Your chosen manufacturer supplies the doors, windows and glazing. Motor, actuator and control selection is confirmed against the opening, hardware, installation space and project requirements.

MOTOR SELECTION / THE DETAILS

Compare the door motors.

From a compact slider to an expansive multi-panel opening, the right motor starts with the moving weight, panel arrangement and available space. Compare the published guide figures, then let Airla coordinate the automation with your door manufacturer.

Door motor comparison — all models use 24 V DC
Motor Guide moving weight Panel configuration Nominal dimensions
Tahoe 180 kg 1–2 panels 45 × 50 × 485 mm
Sierra 450 kg 2–3 panels 70 × 75 × 560 mm
Peak 1,300 kg Up to 8 panels¹ 90 × 190 × 460 mm
Everest 3,600 kg Project-specific² 90 × 190 × 460 mm
Pivot door motor 600 kg Single / multiple panels 585 × 90 × 90 mm

Figures from Airla’s specification guide, p. 6. Maximum combined moving weight and nominal dimensions are guide values, not a complete selection or cavity-clearance specification. ¹ The Peak panel range depends on the motor variant and door configuration; Airla confirms both for your project. ² Everest has no fixed panel-count limit in the guide; load and configuration still require assessment.

Explore each motor and its technical details →

CONTROL YOUR OPENING

Effortless, every day.

A touchscreen, supported voice command or discreet access option, selected for your door.

Door touchscreen displaying open, close, stop and unlock

12-IN-1 DOOR TOUCHSCREEN

Your door.
One touch.

Dedicated touchscreen operation for a compatible automated door.

Explore the touchscreen →

SENSORS, REMOTE & KEYPAD

Arrive.
The door responds.

Add hands-free sensors, a handheld remote, an exterior keypad or fingerprint access to suit how the door is used.

Explore access options →

Google Home logoAmazon Alexa logoApple Home logo

VOICE CONTROL FOR DOORS

Your voice.
Your door in motion.

Discuss compatible door operation with Google Home, Alexa or Apple Home.

Explore voice control →

Compatibility and availability are confirmed for your project. Door-control displays are illustrative.

Explore door & window controls →

Wildfire · Newport, Queensland · corner sliding doors opening · silent playback.

Automation in motion

A waterfront opening, made easy.

At Wildfire in Newport, Queensland, this angle shows the sliding panel travelling beside the waterfront terrace. The motor makes the opening easier to use while the door remains part of the architecture. Selection starts with the panel weight, configuration, hardware and mounting space.

Maleny, Queensland · pool pavilion sliding door closing · silent playback.

Automation in motion

One touch. The whole opening.

At Maleny in the Sunshine Coast hinterland, a large sliding panel closes between the living space and the pool pavilion. The motor is matched to the panel weight and travel so a heavy door moves at a controlled pace, with the frame and glazing supplied by the door manufacturer.

Plan the next step.

What to allow for, who provides what and how the door is controlled.

Ask a project question →

When should I plan door automation?

Ideally, during design and documentation. Early coordination helps reserve motor space, fixing points and cabling before the door system is manufactured.

What do the builder and electrician need to provide?

For a concealed motor, the builder allows for the motor pocket, an access panel and blocking. The door fabricator prepares the jamb and head track for the drive. The electrician provides the GPO at the control box and the cable routes.

These are works by others unless they are included in Airla’s quote. Airla issues the details so each trade knows its part.

What power does the system need?

The motors run at 24 V DC from a control box. The control box needs one dedicated 240 V 10 A GPO installed by a licensed electrician, and can sit up to 30 metres from the motor. Battery backup is built in.

How is the door controlled?

Every door system works from four commands: open, close, stop and unlock. The 12-in-1 touchscreen is the main wall control, and a remote, exterior keypad, hands-free sensors or fingerprint access can be added.

A home or building control system connects through relay contacts at the control box. Voice control through Google Home or Amazon Alexa uses the Wi-Fi module and depends on your devices.

Can a door be automated after installation?

An existing door may be suitable. On some sliding doors the motor can be surface-mounted at the jamb behind a cover finished to match the frame. Its condition, hardware, moving weight, access and available fixing space need to be assessed first.

What should I send with an enquiry?

Include plans or photos, the opening manufacturer, configuration, dimensions, total moving panel weight if known, and the current project stage.

Let’s select the right automation.

Share drawings or photos of the opening, or a project message that explains what you would like to automate. We’ll help identify suitable motors, controls and the next steps.

Discuss your project →

Scroll to Top